- +30 210 4225 930
- info@poseidonms.com
Lifeline ARM ACC
Meet the Lifeline ARM Automated Chest Compression (ACC, a device for performing mechanical chest compressions when effective manual CPR is not possible.
In an emergency situation, the Lifeline ARM when used as an adjunct to manual CPR, provides extended CPR with minimal interruptions when fatigue, insufficient personnel, or patient transport (e.g., ambulance, intra-hospital) may prohibit the delivery of effective/consistent compressions to the victim.
The Lifeline ARM has an extremely simplified Control Panel where just two steps are needed to initiate mechanical CPR:
- Adjust the Compression Piston height relative to the patient’s chest for beginning compressions by using the Up / Down softkey buttons located on the Control Panel of the Compression Module
- Depending on the protocol that is in line with your designated emergency response procedures, choose between “Run Continuous,” which performs chest compressions only (no breathing) for continuous chest compressions, or “Run with Breaths,” which follows the compressions with breaths protocol by using programmed pauses for rescue breaths.
Light & Smoke Signal
SOLAS requires one of these markers to be mounted on each bridge wing attached to a 4kg lifebuoy. Mounted in its steel bracket on each bridge wing attached to a lifebuoy. Signal can be mounted up to 56m above sea level. (SOLAS only requires>30m). Produces dense orange smoke for 15 minutes and 2 LED lights burn at 2 candela for 2 hours minimum. Signals location of a man overboard by day or night.
Linethrower 250 Body and Line
Self-contained linethrowing appliance. Plastic launcher with 250m of 4mm dia line. Needs to be fitted with 9500800 rocket prior to use. Typically 4 units required to be carried on SOLAS vessels. Replace container along with every third set of rockets i.e. after 9 years. NON hazardous for transport without rocket fitted.
Linethrower 250 Rocket
Replacement Rocket for use in Linethower 250 Body and Line container Item No.9500700
SOLAS typically requires that 4 Linethrowing appliances are carried by ships.
58 PCS Lock Out Tag Out, Wall Station Kit
Ensure workplace safety with our 58 PCS Lockout Tagout Kit, designed for multiple lockouts with high-strength locks and 6-hole hasps. This all-in-one set provides maximum security for industrial and electrical maintenance, preventing unauthorized access and ensuring compliance with safety regulations
Lock Out Tag Out Electro-Mechanical Portable Kit
The Lock Out Tag Out (LOTO) procedure is an essential safety system used during maintenance and repair work on machinery and electrical installations to prevent accidents caused by the unintended activation of energy sources. The LOTO process involves isolating energy sources, locking them with a mechanical device, and tagging them with a warning label to ensure worker safety.
The station has 3 layers, for convenient sorting during maintenance. The first layer is a double-layer portable suitcase. The second layer is a double-drawer case, and the third layer is a tipping bucket toolbox with thick, wear-resistant large rollers for easy transfer.
Marine hose- MED SINFLEX
The Marine hose is characterized by its lightweight. Flexible and low friction loss. It is a multipurpose hose suitable for a wide range of applications.
Standards:
EN 14540:2014 certified
MED SOLAS certified
Characteristics:
EN 14540:2014 certified
MED SOLAS certified
Light weight
Good flexibility
High elasticity
The liner process produces an amazingly thin but
Extreme low friction loss
Temperature range from -10°C to 55°C (14°F to 131°F)
MARINE SOLAR REGULATOR
The Sealite Marine Solar Regulator is ideal for marine installations. The regulator acts as an intelligent switch between the battery terminal and the solar panel.
Medium Temperature Dry Block Calibrator
ETC 600/ETC 600-2
• Range : 50 to 600°C
• Accuracies : ±0.1% F.S. +1 digit (ETC 600); ±0.15% F.S. +1 digit (ETC 600-2)
• Cost Effective – Economy Model
• Immersion Depth : 110 mm (ETC 600); 190 mm (ETC 600-2)
• Calibration at Site, Fast & Reliable
• PD Temperature Control
• Analog Output
• Switch Test facility
• Interchangeable Thermowell Inserts, Single / Multihole
Mini Porter
The Mini Porter offers the highest reliability, ease of use and function employing superior technology, engineering, and manufacturing quality. The Mini Porter offers a 360 degree maneuverability, roll & turn easily in any spaces, and move hoses safely even at the maximum rated capacity.
The mini porter is an assistance device for maneuvering fire hose in operations. These pipes generally range from 25 to 110mm for conventional missions. Because of the high pressure, the hose becomes much stiffer and more difficult to maneuver, especially since the length of hose deployed is important. The difficulties of maneuver are related to the stiffness of the pipe once under pressure on the one hand but also and especially to the weight of the pipe on the other hand.
MK3 Odeo Flare
Odeo stands for Omni Directional Electrical Optical signal and is an innovative replacement and enhancement to traditional hand flares.
Traditional flares will illuminate for around 30 seconds before extinguishing: the Odeo Flare™ illuminates for around 6 hours at full illumination. Because no pyrotechnics are used, the Odeo Flare™ is totally safe when switched off, and because it uses battery power (high power Lithium or Alkaline cells), it can even be safely posted or carried in baggage on flights.
Whilst originally designed for marine use, its lightweight, safe performance means that it is incredibly useful for any outdoor activity. Mountaineering, skiing, expeditions etc. – any activity can benefit from the added safety and security of carrying a distress flare – without the unwanted dangers.
Mooring Hardware – Chain, Shackles & Swivels
In addition to offering complete mooring solutions to complement each Sealite buoy product, Sealite also offers a range of mooring hardware including chain, shackles and swivels for individual purchase as required by the customer.